Build Yourself a water Heater at 10 Taka

How are you all? I have learned to turn the Internet is a beautiful thing we teach yourselves. Now teach you how to ten at water heater, which can be made in just 3/4 minutes with a glass of water can be heated. What you need: 1. Two Blades  2. Electric Wire (required) 3. Plug 1 4. Fuse (optional) 5. 1-foot piece of wood (wood-scale mandated). How to make: Take electric wire plug one end. Put the other end of the wire with two blades. The two blades are opposite to each other at one end of a piece of wood attached to the other so that the blades do not touch. Barati safety fuse for the power so that you can use on another leg to the other, but never the two blades is not an accident occurs. Your water heater was. Take a glass of water at the edge of the wooden blades that are attached to two power connections and turn on the edge of the Place doused.

3/4 minutes in hot water ready. One must remember that the water must be of glass or plastic container that do not use any metallic containers.
Also a pot of water and electricity connections while the two blades do not touch it, because accidents can happen maratbaka. Note: This project will make full responsibility. This is going to make any kind of accident or loss is not the case, I'll carry no responsibility.